Gluing fretboard on neck accurately

I glue my boards on when my neck is at a similar state of completion. I set up C-clamps to but up with the boards at the nut and towards the body end. Four points of contact with clamps at either end and on both sides. I can play with these until my alignment is perfect. I do this while the neck blank is held in a vise. Slide the tapered board out towards the body, apply clue and slide back in. It is probably a pretty amateurish way of going about things, but that is what I am.

Thanks!

A photo of your method would be great, if you have one.
 
Top Bottom