Timbuck
Well-known member
I was intrigued by these new fangled lining clamps supplied by Stewmac..as these were designed for guitar I realised that they would be too big for my mini sized soprano linings at 6mm X 4mm....So I got the 3 D printers running and an hour later came up with this design...and it works very good holds the linings in place firmly with no gaps as the clamp jaws are an exact fit to the linings.....So now i will make up a few more and try them out on my next build.
E5A24AC2-88FC-43C2-8E45-5A8ED404F315 by Ken Timms,
23DEFD66-E1EF-4D76-80F0-BD159C352024 by Ken Timms,
2BA2B3B1-0E83-46D3-AF16-09FED026287F by Ken Timms,
D560F2EE-C3C2-45E4-9C31-EDCF48FD610A by Ken Timms, on Flickr
E5A24AC2-88FC-43C2-8E45-5A8ED404F315 by Ken Timms,
23DEFD66-E1EF-4D76-80F0-BD159C352024 by Ken Timms,
2BA2B3B1-0E83-46D3-AF16-09FED026287F by Ken Timms,
D560F2EE-C3C2-45E4-9C31-EDCF48FD610A by Ken Timms, on Flickr
Last edited: