Results 1 to 6 of 6

Thread: Pono Truss Rod Wrench

  1. #1
    Join Date
    Sep 2019
    Location
    SF Bay Area California
    Posts
    104

    Default Pono Truss Rod Wrench

    Howdy folks,
    Does anyone know what size Allen/Hex wrench size I need for my Pono baritone? I'm pretty sure I'm supposed to turn it a little bit counter-clockwise to reduce a pervasive buzz on the 2nd fret area.
    Thank you,
    Neil_O
    Too chicken to install strap buttons...

  2. #2
    Join Date
    Apr 2019
    Location
    Wisconsin, central USA
    Posts
    202

    Default

    You might seek some additional advice over in the Technical area. Last I heard, it is inadvisable to mess with a truss rod to correct buzz....especially if you can narrow the problem to one or two frets. You may "just" have a high second or third fret. Does it buzz on all strings, or one more than others?
    KoAloha KSM-10 Pikake ::: Kanile'a Islander MAPG-4-C ::: Kanile'a K-2 Super Concert ::: Kala KA-SSTU-S ::: Fender Montecito Tenor Koa ::: KoAloha Silver Anniversary KCM-00 #060 ::: Antica Ukuleleria Concert Libero ::: Pono TE-MD-R

  3. #3
    Join Date
    Feb 2019
    Location
    Honolulu
    Posts
    942

    Default

    You may need to get the frets leveled. A truss rod is used to adjust neck relief in the middle of the neck, i.e., around the 7th fret, and doesn't make much difference on the first few frets.

  4. #4
    Join Date
    Sep 2019
    Location
    SF Bay Area California
    Posts
    104

    Default

    Thanks for the advice! My reason for wanting to try to adjust the truss rod is that the seller told we they had moved the neck (anti-relief) shortly before they sent it to me. I plan to try a slimmer set of stings (Worth Browns replacing classical strings) before I do anything hasty. I certainly am not a serial truss-rod adjuster by nature on any of my guitars. In fact I have never adjusted one. I have checked it out more and think the second fret on one string is the culprit. Before I attack that fret, I'd like to move the neck a MM.

    Anyway, bump for the size wrench I should use. Please help if you have a Pono! The manufacturer has not returned my calls or emails.
    Too chicken to install strap buttons...

  5. #5
    Join Date
    Dec 2009
    Location
    New England, USA
    Posts
    4,191

    Default

    Maybe email HMS, as Andrew K there runs the Pono business, and would probably have your answer.
    John

  6. #6
    Join Date
    Sep 2019
    Location
    SF Bay Area California
    Posts
    104

    Default

    I got this response from my email question: "Aloha Neil, 5/32” or 4mm".

    Thanks all.
    Too chicken to install strap buttons...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •