Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Display Stand

  1. #1
    Join Date
    May 2010
    Location
    Cairns, Australia
    Posts
    2,269

    Default Display Stand

    I just knocked up this stand for displaying instruments at a few of the local markets I attend. But now my wife wants me to set it up in the house somewhere. So thought that it might interest some of you that have a collection of ukes hiding away in closets etc.

    Made from New Guinea Rosewood and finished with a wipe on oil/wax that dries very hard overnight. New Guinea Rosewood is dirt cheap here and all the wood was just $10. The instrument hangers are ones for guitars, but I just squeezed the tangs together in a vise to fit a uke neck.


  2. #2
    Join Date
    Apr 2009
    Location
    Fairfield, CA
    Posts
    606

    Default

    That stand is nice, but those 'ukes are gorgeous. Man you do some inspiring and impressive work. I have a Tiger Myrtle tenor underway that I started after I saw yours on the ANZLF. And after a couple months to find some.

    So is that four lattice braced you're up to now? Those were fun to watch the process.

    Steve

  3. #3
    Join Date
    May 2010
    Location
    Cairns, Australia
    Posts
    2,269

    Default

    Thanks Steve. I'm pretty pleased with the stand. Looks much more professional I think when you are trying in part to showcase your woodworking skills.

    I've done 6 lattice braced ukes to date. These 4 (the ones with the 2 sound-holes in the upper bout) were done all at once with small variations in the lattice, but all other aspects of the build kept as close to the same as possible. I've got 2 made from the same piece of Indian Rosewood, with different bindings, one from Tassie Blackwood and are all concerts. Also a Tenor in Tiger Myrtle that you saw on the ANZf. It's by far my favourite of the lattice braced ones.Both for the looks and the tone and volume is really amazing.

    I'm really looking forward to developing these instruments and will post a build log of the next one when it takes place, though that might be a bit of a wait. Got a lot going on in the next few months, not the least is buying a new home and having to move and set up a new shop.

  4. #4
    Join Date
    Feb 2010
    Location
    Honolulu, Hawaii 5min away from waikiki
    Posts
    28,151

    Default

    Aloha Allen,
    Wow, You do some awesome woodwork....the ukulele rack looks beautiful, and the ukuleles even better. I can tell that you've been doing
    it for some time, do you make ukuleles for a living or are a weekend hobbist? By the way, what type of wood are you using for the sides
    and backs of the ukuleles? If I were to choose, my choice would be the on at the end with binding. Where I live, you may probally get the
    top board of the rack for ten bucks if you're lucky, no kidding. Well thanks for sharing with us, You're an awesome craftsman!!!"Keep on
    vibrating them strings" Uke ONNN! MM Stan

  5. #5
    Join Date
    May 2010
    Location
    Cairns, Australia
    Posts
    2,269

    Default

    I'm more of a hobbiest Stan but it's an all consuming passion that I spend 7 days a week at. I sell my instruments under the label of Barron River Guitars. but it's not enough to keep me and the wife in the manner that we like, so I still have a day job.

    I use all sorts of wood for my instruments. Build guitars and Weissenborn and ukes. I like to use Australian timbers, but have a good selection of others. If it looks good, and I can get it at a good price, then it goes into my stock.

    All of my instruments shown have bindings and bwb purflings except for the rope bound one, though they may be difficult to see in this photo. In fact, I've only ever done 2 instruments without bindings.

    The ones in the photos are from left to right, Tenor of New Guinea Rosewood and Western Red Cedar with rope bindings, Concert of Australian Blackwood and Bear-claw Stika with Indian Rosewood bindings, Concert of Tiger Myrtle and Engelman Spruce with Tiger Myrtle bindings, Concert of Indian Rosewood and Bear-claw Sitka wit blackwood bindings, the same for the next but Cocobolo bindings, and finally a Tenor of Tiger Myrtle with Bear-claw sitka top and Tiger Myrtle bindings.

  6. #6
    Join Date
    May 2009
    Location
    Wellington, New Zealand
    Posts
    813

    Default

    Hey Allen, I saw your work at ANZLF too and yeah, amazing attention to detail and what fantastic output. I'm gutted that I didn't get a chance to book in for the Cairns ukefest (got stuck between jobs), I'd have loved to have seen some of it in person. Who knows, might win lotto yet!

    Anyway, what are your thoughts on something cheap and cheerful like this:
    http://www.instructables.com/id/PVC-...and-Rock-Band/

    I imagine one could get the lengths all pre-cut at their local hardware store (e.g. Mitre 10 for us ) and basically assemble it at home.

    Definitely not as good looking as yours, but maybe a bit more accessible to people who aren't that DIY savvy?

  7. #7
    Join Date
    May 2010
    Location
    Cairns, Australia
    Posts
    2,269

    Default

    I've got a mate in Townsville that has something similar to that for his guitars. Made from a few lengths of pine and some dowels to separate the necks. Pretty simple to knock up. Just butt joints, and screws, then the dowels are glued into corresponding drilled holes in the upper member.

  8. #8
    Join Date
    Nov 2009
    Location
    Western Massachusetts
    Posts
    467

    Default

    Allen, What a great way to display your work. It really makes your professionalism stand out!

    A lot of us here on UU have admired your work on ANZLF,
    Stephen

  9. #9
    Join Date
    Aug 2008
    Location
    Wales, UK
    Posts
    5,097

    Default

    Great work Allen - suggestion? Put a longer fingerboard on your twin pukas to balance that 'blank' area. Are you using CF reinforced balsa for the bracing or just spruce? I recently played a lattice braced guitar with sound port, laminated sides. While the bass was incredibly strong and out there, the treble was quite weak... what is the balance like on these beauties?

  10. #10
    Join Date
    Feb 2010
    Location
    Honolulu, Hawaii 5min away from waikiki
    Posts
    28,151

    Default

    Aloha Allen,
    Just curious, what does the ukulele with rope bindings, red cedar top and New guinea rosewood sell for?
    And do you have a website under Barron River Guitars? Thanks for the response, pic's and sharing your
    finished works of mass beauty. You may say you're a hobbist, but I see a definete passion within your
    works. Do you ever use old world timber or is it too costly? Thanks also for keeping the ukulele movement
    alive in Australia. Take Care and Best Wishes!!! Aloha MM Stan

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •