Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: Ball end nylon strings

  1. #1
    Join Date
    Jun 2009
    Posts
    562

    Default Ball end nylon strings

    just a little hint, something we learned stringing eyeglass frames which use nylon line.

    A knot is big and unsightly, so we would melt the end with a match and a ball forms on the end of the string. Try not to light the string, just melt it, and you usually get a nearly perfect ball.

    Since taking up uke I have tried this with strings, and it works here, too. Fat strings that are hard to knot are easy to melt into a ball end. For fat strings you can just thread it through the bridge and the ball holds it.

    For skinnier strings the ball may be too small, so these you still have to tie. But a ball on the end keeps the tie from pulling through like a knot, only without extra string sticking out.

  2. #2
    Join Date
    Nov 2009
    Location
    Smyrna, Georgia
    Posts
    2,194

    Default

    You can also go to a crafts store and buy a bag of small beads, which come in a gazzillion shapes and sizes for less than $5. You tie them onto the end of the string. There are hundreds in each bag.

  3. #3
    Join Date
    May 2008
    Location
    Collingwood, ON Canada
    Posts
    3,849

    Default

    Another alternative is to use glass beads, available at any craft supply store.

    Oops. Edit time. I just saw the post above me with the same comment. I have some notes on using glass beads on uke strings on my Web site. They can enhance the tone a bit, too.
    Ian
    -------------------------------------------
    “Errare humanum est, perseverare diabolicum, et tertium non datur. To err is human; to persevere in error is diabolical; there is no third option.”
    Seneca the Younger
    Ukulele reviews * Vintage Uke Music * Tequila * Henry Hudson * Harmonica reviews * Blog

  4. #4

    Default

    This causes me to be curious as to why only steel strings come with ball ends from the factory, and nylon strings are always tied, when ball ends would make life easier..
    Is it due to tradition, or to save costs?

  5. #5
    Join Date
    Sep 2009
    Location
    VT
    Posts
    1,174

    Default

    I've never tried them but Fender makes some ball end nylon strings.

  6. #6
    Join Date
    Mar 2009
    Location
    near Rochester, NY
    Posts
    52,083

    Default

    When melting nylon strings to form a ball....

    Don't hold the flame under the string, hold the string under the flame. Much easier to control the melting process, much less likely to burn yourself. Bring the string up under the flame and control the melting by varying the proximity....
    Things get better with age. I'm approaching magnificent....

    Kala KA-SC :: Sapele /ebony soprano, handmade :: Kiwaya K-Wave Tele Uke :: Big Island KTO-TR :: Lanikai LU-8EK :: Eastman concert prototype :: vintage banjolele :: Mainland gloss mahogany concert

    "And if you don't know where you're going, any road will take you there..." - George Harrison

    "Just a few ukulele hooligans getting wild and strummy...." - chindog


    5:2576

  7. #7
    Join Date
    Jun 2019
    Location
    Minneapolis, MN
    Posts
    9

    Default

    I'm so glad I saw this. I, too, am an optician- and thought I'd be genius to treat the ends of the strings the same way we do some semi-rimless frames!
    Your friendly neighborhood optician

  8. #8
    Join Date
    Aug 2012
    Location
    Arizona
    Posts
    2,575

    Default

    Wow, cool tip!
    Just Play

    Sopranos: 1st uke, Lanikai soprano LU-11 - Aquilas | 30's Martin style 0 - Martins
    Concerts: Kanile'a K-2 CP - Living Water | Islander AC-4 - Living Water | Waverly Street banjolele - Worth Browns
    Tenor: Epiphone Hummingbird - Living Water low G
    UBass: Kala FS2 - Pahoehoe

  9. #9
    Join Date
    Sep 2013
    Location
    Los Angeles, near the Beverly Center.
    Posts
    4,410

    Default

    Good idea I'm, going to do it.


    This is Michael Kohan in Los Angeles, Beverly West near the Beverly Center
    9 tenor cutaway ukes, 5 acoustic bass ukes, 11 solid body bass ukes, 9 mini electric bass guitars (Total: 34)

    • Donate to The Ukulele Kids Club, they provide ukuleles to children in hospital music therapy programs. www.theukc.org
    • Member The CC Strummers: YouTube: www.youtube.com/user/CCStrummers/video, Facebook: www.facebook.com/TheCCStrummers

  10. #10
    Join Date
    Aug 2017
    Location
    SE Connecticut, USA
    Posts
    885

    Default

    I always do this to the tag end when I’m tying stopper knots. It makes a nice tidy finish and adds security to the knot. I’m not sure, however, that I would have thought to trust the melted ball to hold a string in a bridge on its own without a stopper knot... but if you say it works.
    Sopranos: aNueNue Khaya Mahogany 1, Bruko No. 6; Kiwaya KS-1; Kiwaya KTS-4; Kiwaya KTS-4K; Martin S-O
    Concerts:Cahaya CY-0112; Kiwaya KTC-1; Martin C-1 (ca. 1947-1955); Musicguymic's Kolohe
    Tenors: Cordoba 24T; Kiwaya KTT-2K
    Baritones: Cordoba 24B

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •