Help please!

Foo

Active member
Joined
Sep 25, 2010
Messages
32
Reaction score
0
Hey Fellow UUers , Recently with my new Lanikai Zebrawood ukulele i have encountered a problem.

The lead that is attached to the mic that leads to the input has unstuck itself from the inside of the ukulele and is now sitting there. This doesn't seem so bad at first but when you play it Buzzes(or vibrates) with the strings(mainly the Low C when i pick it).



I've attempted to temporary fix it, Masking tape, Electrical tape etc But after a few mins of playing they fall and lose their stick.


My question is , do i glue it to the ukulele or doublesided tape or what?


All help is appreciated thanks heaps!
 
I would put a small piece of double sided tape on the inside of the uke, stick the wire to the tape and put another piece of double sided tape over it.

Brad
 
I second what Brad said. I've seen people get good results with small strips of gaffa/duck tape, but too much of it can dull the tone. Good luck - it's a fiddly job.
 
2 strips of double sided tape did the trick! Cheers fellas!
 
Top Bottom