MichaelPfenning
Well-known member
I was going to drill the holes for the tuners and I realized my tuners aren't long enough. I Purchased the tuners with the longer post 25mm but the peg head is 20mm thick. I don't know what to do next. I could mortice the tuners down into the back of the peg head. I could thin the whole head down from the back side and taper it into the neck. The Second question is. If my scale length is 15 inches do I place the saddle exactly 15 inch from the nut or would 15 3/32 be better ? and can I glue the bridge down and finish ( using Tru-oil) or do I have to tape it off and glue it later. Sorry for the length of this post. Any help would be appreciated.